+86 151 9282 9200
PH ： +86 151 9282 9200
E-mail ： slaes@@masterpacking.cn
ADD ： No.1706226,comprehensive Free Trade Zone, Linyi City, Shandoong, China.
How to place wooden pallets
1. Positive and negative interleaving: the same layer and different columns are stacked vertically at 90 degrees. Two adjacent layers of wooden pallets are stacked by rotating the other layer 180 degrees. This method is similar to the bricklaying method in architecture. The bite strength between different layers is high, and there is no re joint between adjacent layers, so the stability after stacking is high, but the operation is more cumbersome, and the vertical planes between packages do not bear load.
2. Rotary staggered type: two adjacent packages on the first layer form a 90 degree angle with each other, and the stacking difference between the two layers is 180 degrees. In this way, the adjacent two layers bite and intersperse with each other, which has high stability and is not easy to collapse. The disadvantage is that it is difficult to stack, and holes are formed in the base, which reduces the use force of wooden pallets.
3. Crossing type: rotate adjacent places by 90 degrees, one layer horizontal and the other layer vertical. Each layer has a certain occlusal effect, but the occlusal strength is not high.
4. Overlapping type: that is, each layer is stacked in the same way, corresponding from top to bottom. This method has the advantages of fast operation speed, vertical stacking at four corners and sides of packaged goods, and large bearing capacity. The disadvantage is the lack of bite between layers, which is easy to collapse. The method has satisfactory stability for low area and large area goods. If combined with corresponding fastening methods, it can not only maintain stability, but also save labor-saving benefits of loading and unloading operation.